Tips for installing a door lock

When you have a new door in your house, you will be required to fit it with a lock. You can ask the carpenter to do it for you if you are getting a new door fixed. But if the old lock in your door needs repair or replacement, you might not have the time to wait for the carpenter to come and fix the issue for you. In such cases, you should know how to install a door lock. Hire a reliable locksmith in Tulsa OK.

Here are some tips and steps that’ll help you install a door lock.

If your door has a hole pre-drilled into it, it is well and good, but if it doesn’t have one, you will have to drill a hole into the door before you start installing a lock.
Each lockset comes with a paper or cardboard template that has to be used for drilling holes. Wrap this paper or cardboard around the edge of the door and secure it firmly to mark the two holes. Once labelled, you can now drill the holes using a drilling machine. Be careful while you are drilling so that you do not damage the door.

You will have to drill two holes – on the cylinder hole and second the bolt hole. Drill the cylinder hole of the size mentioned in the guide and stop digging when you can see the drill coming through. At this moment, start drilling from the opposite side.
Similarly, drill a hole for the bolt till you reach the cylinder hole. Now, smoothen the edges of the holes with sandpaper. Insert the bolts in the holes and place the bolt plate over it and trace the outline of the bolt plate over the door surface.

Follow the instructions given in the user’s manual to remove the bolt and mortise edge so that you are left just with the surface. Cut the mortise with the help of a chisel and insert a bolt and plate in the mortise. Now, drill holes for mounting screws and install the screws to hold the pins in their place.

Proceed with inserting the outside lock cylinder and as it fits, try and set the inside lock cylinder too. Secure the entire assembly with screws. Here the process to install a door lock gets complete. You now need to check the lock if it is functioning correctly or not. When you check the lock, if there is any misfit, you will have to remove the entire assembly and chisel out more wood to make enough space for the lockset to fit in.

If you are replacing a door lock and not installing a new one, you might have to put in fewer efforts. Always remove the old knob and take it to the shop so that you can buy something of the same style. You can easily remove the knob using a screwdriver, and take measurements of the holes. Once removed follow the steps mentioned above to install a new lock. Hire services from a reliable locksmith in Tulsa OK.

Call Now